RIELLO

Communication Cards & Adapters enable UPS remote management via TCP/IP, SNMP, Modbus, BACnet, Profinet, Profibus using RS232, RS485, Ethernet, Relay I/O. Compatible with PowerShield³ and SCADA.

MultiPanel remote display for UPS shows input/output voltage, battery, and operating mode in real-time. Supports RS232/RS485, Modbus/Jbus. Ideal for centralized or remote UPS monitoring.

Multi I/O card with RS485 Modbus/Jbus supports 8 inputs and 8 outputs (3A at 250V) for remote UPS monitoring and control, SCADA integration, ideal for energy infrastructure management.

MultiCom 421 is a Profinet protocol converter card for UPS, enabling SCADA and PLC integration. Supports Profinet-IO for real-time UPS monitoring and centralized energy management.

MultiCom 411 is a Profibus protocol converter card for UPS, enabling integration with SCADA and automation systems. Supports Profibus DP and Plug & Play setup for centralized energy control.

MultiCom 384 Relay I/O card provides UPS status alarms via configurable NO/NC relays, supports ESD/RSD, rated 3A at 250V. Ideal for precise control and monitoring in industrial power systems.

MultiCom 372 RS232 interface card adds communication ports to UPS, supports ESD/RSD via removable terminal board, supplies 12V 80mA, ideal for safe emergency stop and control systems.

MultiCom 352 is a Serial Link Duplexer enabling two devices to connect to a single UPS serial port. Ideal for systems needing multiple device access and LANs with firewalls.

MultiCom 302 is a protocol converter card for UPS, connecting via Modbus/Jbus over RS232 or RS485, with an independent RS232 port for PC and PowerShield³. Enables precise UPS management.

NetMan Environmental Sensors monitor temperature, humidity, and control devices like fans and locks. Data available via Web, SNMP, and PowerShield³ for efficient environmental management.

NetMan 208 network card for Riello UPS connects via 10/100/1000 Mb LAN, supports IPv4/6, Modbus/TCP, BACnet/IP, SNMP, VMware. Enables efficient UPS management for medium to large networks.

MMS 3-Phase automatically or manually switches loads between two power sources. Protects against faults, short circuits, overloads. LCD alerts. Supports PowerShield³, Windows, Mac, Linux, VMs.

MMS is an energy management system with hot-swap, easy setup, microprocessor and thyristor-based fast switching, short-circuit protection, 32-character LCD, RS232 control, and expansion support.

Multi Socket PDU (MDU) offers 8 individually controlled outlets, local/remote ON/OFF via USB, RS232, SNMP. LCD shows voltage/current. 16A, 19” rackmount. Ideal for efficient data center power management.

Multi Switch ATS automatically switches between two power sources on failure. Supports 16A/30A, rackmount 19”, multiple outputs, SNMP/SSH remote control, fast transfer < 8–20ms.

Multi Switch automatically switches between two power sources, ensuring stable backup. 8 IEC 10A outputs, LAN/SNMP/SSH support. Ideal for flexible, reliable data center power.

Multi Pass and MBB are UPS maintenance bypass switches. Multi Pass is manual for rack or wall mount. MBB supports single/three-phase UPS up to 6.4 MVA, preventing backfeed and power downtime.

Master FC400 Series 30–125kVA static frequency converter transforms 50/60Hz to 400Hz with IGBT and digital control, VFI SS 111 compliant, with isolation transformer—ideal for aviation, military, and marine use.